LepakLah
Tech

Wi-Fi Dead Upstairs? Fixing Home Coverage in a Malaysian Terrace House or Condo

Most bad home Wi-Fi in Malaysia isn't the fibre plan; it's a router stuck in a corner behind brick walls. Here is how to test where the problem is, where to put the router, when an extender is enough, and when a mesh system or a wired access point is worth paying for.

Lepaklah Editorial4 min read

You're paying for a fast fibre plan, the speed test downstairs looks fine, and then you go up to the bedroom and a video won't load. Sound familiar?

In most Malaysian homes, the fibre line isn't the problem. The problem is where the Wi-Fi comes from and what it has to pass through. Here's how to fix it, starting with the free options.

Why Malaysian homes are tough on Wi-Fi

  • Brick and concrete walls and floors. Wi-Fi signals weaken every time they pass through a wall or floor, and solid masonry is much worse than plasterboard.
  • The router lives by the front door. In many terrace houses, the fibre termination point is in the living room or near the gate, so the router sits at one end of a long, narrow house.
  • Long, narrow layouts. A double-storey terrace can be 20 metres or more deep. The kitchen and the back bedrooms are a long way from the router.
  • Condos full of neighbours. In high-rises, dozens of networks compete on the same channels.

Step 1: Find out where the problem is

Run a speed test in three places:

  1. Right next to the router, on Wi-Fi.
  2. On a laptop plugged into the router with a cable, if you can.
  3. In the room with the problem.

What the results tell you:

  • Slow even next to the router or on cable? It's likely your plan, your line or the router itself. Restart everything, then contact your provider. If they don't fix it, you can file a broadband complaint with MCMC.
  • Fast near the router, slow in the far room? That's a coverage problem. Read on.

Step 2: Move the router (free)

Small moves make a big difference:

  • Get it out of the cabinet or TV console, and off the floor.
  • Put it higher, on a shelf, and in the open.
  • Move it towards the middle of the house, if the fibre cable allows. A longer network cable from the fibre box to the router is cheap.
  • Keep it away from the microwave, large mirrors, fish tanks and metal cabinets.
  • On a double-storey house, placing the router near the staircase often helps signal reach upstairs.

Step 3: Check the router's settings

  • Use the 5GHz band for speed near the router, and 2.4GHz for range further away. Many routers combine them under one name.
  • Update the firmware, either in the router's app or admin page.
  • Restart it occasionally, especially if speeds drop over time.
  • In a condo, try changing the Wi-Fi channel, or let the router choose automatically.

If your provider's router is several years old, ask whether they'll replace it. Newer Wi-Fi 6 routers handle many devices better.

Step 4: Add coverage, if you still need it

Option Good for Watch out for
Wi-Fi extender One weak room close to the edge of coverage Can halve speeds; often creates a separate network name
Mesh Wi-Fi system Double-storey terraces, semi-Ds and larger condos Costs more; each unit needs a decent signal from the next
Wired access point Homes with network cabling, or where you can run a cable Needs a cable; the most reliable option
Powerline adapters Sending internet through the home's electrical wiring Results vary with the wiring

For most double-storey terraces, a two- or three-unit mesh system solves the problem: put one unit next to the router and another upstairs, roughly in line of sight of the stairwell.

If you can run a cable, a wired access point or a mesh unit connected by cable ("wired backhaul") gives the most consistent speed. Some providers sell or rent mesh units as add-ons to their plans, which is worth asking about.

Step 5: Is it time to change plans?

If your speed is fine at the router but you have many people streaming and working at once, a faster plan might help, but only after coverage is sorted. Our comparison of home fibre plans from Unifi, TIME and Maxis covers prices and speeds.

If you can't get fibre at all, see whether Starlink makes sense.

FAQ

Why is my Wi-Fi slow upstairs?

Wi-Fi signals weaken as they pass through walls and floors, and brick and concrete block them strongly. A router placed downstairs at the front of a house often can't reach the upper floor well.

Is a mesh system better than a Wi-Fi extender?

For whole-home coverage in a double-storey house or large condo, a mesh system is usually better. An extender can work for a single weak room but often reduces speed.

Where should I put my Wi-Fi router?

As high and central as possible, in the open, away from metal objects and microwaves. On a double-storey house, near the stairwell often helps signal reach upstairs.

Should I use 2.4GHz or 5GHz Wi-Fi?

5GHz is faster at shorter range, while 2.4GHz reaches further but is slower and more crowded. Use 5GHz near the router and 2.4GHz for distant rooms.

Lepaklah Editorial

Researched and edited by the LepakLah team.

More from the team →
Read us on Google more often.Pick LepakLah as a preferred source and our stories rank higher in your results.
One letter, most Sundays.No noise. Unsubscribe anytime.